How do I set up a WiFi Booster?
To manually set up a WiFi Booster, follow the steps for your router.
Make sure your Power Hub is turned on and connected to the internet. The LED on the front should be solid white and the internet LED at the back should be green
Place the Booster within two metres of your Power Hub and turn it on
Wait for the LED on the front of the Booster to start flashing blue and then turn steady purple
Press the WPS button at the back of your Power Hub for three seconds
Press the WPS button at the back of your Booster for three seconds
Wait for the LED on your Booster to turn steady green to indicate pairing is complete, then solid white
Unplug your Booster and move it to a location of your choice. We recommend placing it halfway between your router and where your wireless connection starts to drop out
Once connected successfully, the front LED on both the Booster and Power Hub should be solid white. Check the LED lights are displaying correctly
Make sure your WiFi Hub is turned on and connected to the internet. The internet and power lights at the front should be solid white
Place the booster within two metres of your WiFi Hub and turn it on
Wait for the front LED of your Booster to start flashing white
Press the WPS button on your Booster and WiFi Hub
The LED on the front of your Booster and the WiFi LED on the front of your Hub will start to flash
Wait for the LED on your Booster to turn solid white. This means the devices have finished pairing
Unplug your Booster and move it to a location of your choice. We recommend placing it halfway between your router and where your wireless connection starts to drop out
The LED on the front of the Booster should remain solid white. This can take up to a few minutes
If the light isn’t solid white, please move the booster closer to your WiFi Hub
Make sure your Ultra Hub is turned on and connected to the internet. The LED on the front should be solid white and the internet LED at the back should be green
Place the Booster within two metres of your Ultra Hub and turn it on
Wait for the LED on the front of the Booster to start flashing blue and then turn steady purple
Press the WPS button at the back of your Ultra Hub for three seconds
Press the WPS button at the back of your Booster for three seconds
Wait for the LED on your Booster to turn steady green to indicate pairing is complete, then solid white
Unplug your Booster and move it to a location of your choice. We recommend placing it halfway between your router and where your wireless connection starts to drop out
Once connected successfully, the front LED on both the Booster and Ultra Hub should be solid white. Check the LED lights are displaying correctly
You can also use the Vodafone Broadband app to set up Super WiFi Boosters